80CrV2 is a German carbon steel popular for choppers, bushcraft knives and forged blades.
80CrV2 Steel at a Glance
| Type | Carbon steel |
|---|---|
| Made by | German mills (W.Nr. 1.2235) |
| Typical hardness | 57-60 HRC |
| Key elements | Carbon about 0.8%, chromium about 0.5%, vanadium about 0.2%, manganese about 0.4% |
| Edge retention | 3/10 (modest) |
| Toughness | 9/10 (excellent) |
| Rust resistance | 1/10 (low) |
| Ease of sharpening | 9/10 (very easy) |
| Best for | Choppers and bushcraft |
Ratings are relative 1 to 10 scores for typical factory heat treatments. See how 80CrV2 ranks against 46 other steels in our Knife Steel Chart.
What Is 80CrV2 Steel?
Small amounts of chromium and vanadium give 80CrV2 a finer grain and better toughness than plain carbon steels.
80CrV2 Steel Properties
- Edge retention: Modest.
- Toughness: Excellent.
- Rust resistance: Low. Keep it dry and lightly oiled.
- Ease of sharpening: Very easy.
80CrV2 vs Other Steels
80CrV2 vs 5160
Compared with 5160, 80CrV2 holds an edge slightly longer. 5160 is slightly tougher and resists rust slightly better. Read our 5160 guide.
80CrV2 vs 1095
Compared with 1095, 80CrV2 is tougher. Read our 1095 guide.
80CrV2 vs 1084
Compared with 1084, 80CrV2 is slightly tougher. Read our 1084 guide.
Is 80CrV2 Steel Good for Knives?
Yes, for bushcraft and chopping knives.
Pros:
- Very tough
- Easy to sharpen
Cons:
- Rusts easily
- Modest edge retention
Knives That Use 80CrV2 Steel
Makers sometimes change blade steels between versions, so check the listing to confirm the steel before you buy.
Frequently Asked Questions
Is 80CrV2 steel stainless?
No. 80CrV2 is not stainless and will rust or patina if left wet. Keep it dry and lightly oiled.
How hard is 80CrV2 steel?
Knives in 80CrV2 are usually heat treated to around 57-60 HRC.
Is 80CrV2 easy to sharpen?
Very easy. Most standard stones and pull-through sharpeners work.