To fix the trigger of an airsoft gun, follow these steps for an easy fix:
- Read your airsoft gun’s user manual as you may find useful information on how to dismantle the unit.
- Carefully dismantle the airsoft gun to access the trigger mechanism.
- Locate the trigger unit and then dismantle it carefully.
- If the spring is dislodged from where it should be, put it back properly.
- Test the trigger if this quick fix does the job. If yes, proceed to the next step.
- Assemble the airsoft gun properly and carefully.
Introduction
Even with the best airsoft gun, you’re still bound to experience some issues every now and then with your unit. Problems can be caused by a wide range of factors from your usage, choice of battery, maintenance practices, and even just regular use. Of course, the quality of the item plays a huge part, too. With everything said, it’s best to be prepared to deal with whatever snag you might hit with your rifle.
The most common issues people face with these items, however, are trigger-related. Lots of times, they just stop responding altogether which can then render the weapon useless. This is one of the top things you might want to avoid in the battlefield as it will leave you defenseless.
In this quick guide, we’ll teach you how to fix the trigger of an airsoft gun and get your rifle back to good working condition in no time.
Materials Needed
Here are the items you’ll need to work on a non-responsive airsoft gun trigger:
- Compatible screwdrivers and wrenches for the screws and bolts of your rifle
- A roll of electrical tape
- A pair of scissors
- Your airsoft gun’s owner’s manual
Step by Step Instructions on How to Fix the Trigger of an Airsoft Gun
How do you fix the trigger of a non-responsive airsoft gun? Follow these steps:
Step 1: Read your owner’s manual
Before you start tinkering with your airsoft gun, do a read-through of your unit’s owner’s manual. The said booklet will give you the basic information about the construction of your unit and can clue you in on some maintenance tips and tricks that might come in handy for you.
Step 2: Dismantle the airsoft gun
Once you have an idea on how your airsoft gun works, you can then proceed to the actual tinkering on it. Using a compatible tool like a hex wrench or a screwdriver, carefully remove half of the shell of your airsoft gun. Be very careful in this step and not pull on anything to avoid pulling and damaging its innards.
Some guns, especially the pistols, do not require full dismantling. If you’re fixing one, you can proceed to the next step.
To avoid losing the screws, a cool tip you can try is to tape them to the area where you took them out from. This will speed up your assembly later.
Step 3: Locate the trigger unit
You will need to work on the trigger so you have to find where it’s actually located. This task is simple, though, since you can easily tell where the actual trigger is before you even open up the airsoft gun.
Step 4: Carefully take apart the trigger unit:
As mentioned above, some trigger units are easy to dismantle while others may have an extra layer of covering. If your airsoft gun has the latter, take it apart carefully.
Step 5: Fix the connection of the spring to the trigger unit. Replace if necessary
Once you have access to the innards of the trigger unit, you can already fix the issue that’s keeping it from responding properly when pulled. In most cases, the problem is only caused by a dislodged spring so all you need to do is to correct the position of the spring and that’s it. If the spring isn’t in great shape anymore, you can also replace it with a new one.
If you can give the trigger a try without assembling the whole handle area, do so first to ensure that it now works properly.
Step 6: Assemble the airsoft gun back
To finish the process, assemble the airsoft gun again. Give it a go to see if your fix was effective.
Very Important Things to Remember When Doing DIY Airsoft Gun Repairs
To ensure that you will not have any issues after fixing the trigger problem of your airsoft gun, make sure to remember the following:
- Read the manual first. This will help you get to know your battle machine better and may even teach you a thing or two about its repair.
- Be extremely careful. There are lots of components inside an airsoft gun that can go wonky if you didn’t handle it correctly. Observe great caution when working on the insides of your rifle.
- When in doubt, seek professional assistance. If you don’t think you can handle the repairs, see a professional instead.
Conclusion
While there are lots of possible causes for an airsoft gun’s trigger to stop responding, the most common reason only needs a very simple fix. In most cases, the steps above will be enough to get your airsoft gun working again.
Have any thoughts or ideas that you believe can improve the tutorial above? Jot them down in the comments! If you enjoyed the article, you might also consider sharing it to friends and other airsoft enthusiasts as they might just learn a thing or two here.